Evaluation Kit Models for Power Op Amps
Please note that amplifiers and accessory modules are purchased separately.

Evaluation kits offer a good value as they save time and money. All of the common components needed to build your application circuit are included. This saves time researching and procuring components and avoids any component lead times that may occur. And the kit is assembled. All of the kits include cage jacks (sockets) so the amplifier and accessory modules can be easily removed from the circuit board. All of the common connections are pre-wired via the circuit board and this insures that you won’t have any missed connections or improper bypassing or grounding techniques.

EVAL01

Evaluation Kit for PAD01/02/08 Compact Op Amps

The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and a BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The amplifier is purchased separately. Assembled kit with amplifier installed is shown.

EVAL20

Evaluation Kit for PAD20 High Voltage Op Amp

The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and a BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The PAD20 and accessory modules are purchased separately. Assembled kit shown with the PAD20 installed along with the optional PAD125 and PAD131 accessory modules. Amplifier and accessory modules are purchased separately.

EVAL117

Evaluation Kit for 117A Rail to Rail Power Op Amp

The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The PCB includes sockets to install the optional PAD125 Current Limit Accessory Module as well as the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with PAD117A installed is shown as well as the optional DIN rail mounting and accessory modules.

EVAL118

Evaluation Kit for PAD115, 118, 119 High Power Op Amps

The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the included adaptors. The PCB includes sockets to install the PAD125 Current Limit Accessory Module and the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with amplifier and accessory modules installed is shown and PCB is mounted on a 35mm DIN rail.

EVAL126

Evaluation Kit for PAD126 High Voltage Power Op Amp

The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the included adaptors. The PCB includes sockets to install the PAD125 Current Limit Accessory Module and PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit shown with PAD126 mounted and optional accessory modules PAD125 and PAD131 installed.

EVAL135

Evaluation Kit for PAD135 & PAD183 Compact High Voltage Op Amps

The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail (not included). Assembled kit shown with the amplifier installed. Amplifiers are purchased separately.

EVAL138

Evaluation Kit for PAD138/141 Compact High Voltage Op Amp

The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The amplifier is purchased separately. Assembled kit with PAD138 or PAD141 installed is shown.

EVAL188

Evaluation Kit for PAD188 Compact High Voltage Op Amp

The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. Assembled kit shown with PAD188 installed. The amplifier is purchased separately.

EVAL189

Evaluation Kit for PAD189 High Voltage Op Amp

The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. Assembled shown with PAD189 installed. The amplifier is purchased separately.