|
Please note that amplifiers and accessory modules are purchased separately.
|
Evaluation kits offer a good value as they save time and money. All of the common components needed to build your application circuit are included. This saves time researching and procuring components and avoids any component lead times that may occur. And the kit is assembled. All of the kits include cage jacks (sockets) so the amplifier and accessory modules can be easily removed from the circuit board. All of the common connections are pre-wired via the circuit board and this insures that you won't have any missed connections or improper bypassing or grounding techniques.
|
EVAL20 Evaluation Kit for PAD20 High Voltage Op Amp
KEY FEATURES
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and a BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The PAD20 and accessory modules are purchased separately. Assembled kit shown with the PAD20 installed along with the optional PAD125 and PAD131 accessory modules.
Datasheet
|
 |
| click image for Rev A datasheet |
|
|
 |
| click image for Rev H datasheet |
|
|
EVAL112 Evaluation Kit for PAD112 & PAD113 High Voltage Op Amps
KEY FEATURES
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and a BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The EVAL112 includes sockets for the PAD125 Current Limit Accessory Module as well as the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with amplifier and accessory modules installed is shown.
Datasheet
|
EVAL117 Evaluation Kit for 117A Rail to Rail Power Op Amp
KEY FEATURES
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The PCB includes sockets to install the optional PAD125 Current Limit Accessory Module as well as the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with PAD117A installed is shown as well as the optional DIN rail mounting and accessory modules.
Datasheet
|
 |
| click image for Rev K datasheet |
|
|
 |
| click image for Rev G datasheet |
|
|
EVAL118 Evaluation Kit for PAD115, 118, 119 High Power Op Amps
KEY FEATURES
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the included adaptors. The PCB includes sockets to install the PAD125 Current Limit Accessory Module and the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with amplifier and accessory modules installed is shown and PCB is mounted on a 35mm DIN rail.
Datasheet
|
 |
| click image for Rev C datasheet |
|
|
EVAL126 Evaluation Kit for PAD126 High Voltage Power Op Amp
KEY FEATURES
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the included adaptors. The PCB includes sockets to install the PAD125 Current Limit Accessory Module and PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit shown with PAD126 mounted and optional accessory modules PAD125 and PAD131 installed.
Datasheet
|
EVAL127 Evaluation Kit for PAD127 Rail to Rail Op Amp
KEY FEATURES
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted on two 35mm DIN rails with the included adaptors. The PCB includes sockets to install the PAD1251 Current Limit Accessory Module and the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with PAD127 and accessory modules installed is shown.
Datasheet
|
 |
| click image for Rev E datasheet |
|
|
EVAL129 Evaluation Kit for PAD128 and PAD129 High Power Op Amps
KEY FEATURES
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the included adaptors. The PCB includes sockets to install the PAD125 Current Limit Accessory Module, PAD130 or PAD132 Power Supply Accessory Modules and the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with amplifier and accessory modules installed and kit mounted on DIN rail is shown.
Datasheet
|
 |
| click image for Rev E datasheet |
|
|
 |
| click image for Rev B datasheet |
|
|
EVAL135 Evaluation Kit for PAD135 Compact High Voltage Op Amp
KEY FEATURES
The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail (not included). Assembled kit shown with PAD135 installed. PAD135 amplifier is purchased separately.
Datasheet
|
EVAL137 Evaluation Kit for 137 Rail to Rail Power Op Amp
KEY FEATURES
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The PCB includes sockets to install the optional PAD125 Current Limit Accessory Module as well as the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with PAD137 installed is shown as well as the optional DIN rail mounting and accessory modules.
Datasheet
|
|
| click image for Rev a datasheet |
|
|
EVAL183 Evaluation Kit for PAD183 Compact High Voltage Op Amp
KEY FEATURES
The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail (not included). Assembled shown with PAD183 installed. The amplifier is purchased separately.
Datasheet
|
 |
| click image for Rev A datasheet |
|
|
|